Chapter 11: Legato AAM for AIX,
4.Recover or copy the following files from the active node:
AIX
•/usr/bin/nw_ux.lc
•$FT_DIR/bin/envsh (envcsh for
•/opt/networker/bin/nw_ux.lc
•$FT_DIR/bin/envsh (envcsh for
Linux
•/usr/sbin/nw_ux.lc
•$FT_DIR/bin/envsh (envcsh for
For detailed instructions on using the recover and mmrecov commands, refer to the man pages or the Legato Command Reference Guide.
Task 5: Start the Cluster Software on Each Node
On each of the remaining nodes in the cluster: | 11 |
1. Start the cluster virtual server, as follows: |
cd $FT_DIR/bin
. ./envsh
./ft_startup
If the virtual server fails to start on the node because of an outdated sites file, copy the following file from the active node:
$FT_DIR/config/domain_name_sites
2.Run the networker.cluster script:
If you have already restored or copied the nw_ux.lc file from the active node in step 3, answer No to the following prompt:
Do you wish to automatically add
NSR_SHARED_DISK_DIR and NSR_SERVICE_ID in
/AAM_ installation_ directory
Yes or No [Yes]? no
3.Repeat steps 1 and 2 for each node in the cluster.
Legato NetWorker, Release 7.0 | 163 |
Disaster Recovery Guide |