Task 1: Recover the System State and Quorum Data
•“Task 2: Replace the Quorum Data with the Recovered Quorum Data” on page 118
•“Task 3: Evict Node_B from the Cluster” on page 119
•“Task 4: Install the Cluster Software and Patches on Node_B” on page 119
Task 1: Recover the System State and Quorum Data
To recover the system state and quorum data:
1.Select a node in the cluster that has the good (and possibly the latest) backup of the system state and the quorum data. (This procedure uses Node_A, for example.)
2.Verify that the Cluster Service is running on Node_A.
3.From Node_A, recover the following:
•System state
•Quorum data (If the quorum disk is owned by a virtual server, use the directed recover procedure. For details, refer to the Legato NetWorker Administrator’s Guide, Microsoft Windows Version.)
Make sure that you recover the quorum data to a different directory on the quorum drive.
For example, if the quorum data previously resided in G:\MSCS, recover the data to G:\RECOVER\MSCS.
4. Shut down Node_A.
Important: Do not reboot Node_A.
6 Task 2: Replace the Quorum Data with the Recovered Quorum Data
To replace the quorum data to Node_B:
1.On Node_B, uninstall the cluster software.
2.Reboot Node_B.
118 | Legato NetWorker, Release 7.0 |
Disaster Recovery Guide |