Chapter 4: Windows Disaster Recovery

3.If you know which slots have changed configuration since the disaster, inventory only those slots. For example, to inventory only slot 3, run the following command:

nsrjb -Iv -S 3

If you do not know which slots have changed configuration since the disaster, inventory all slots by running the following command:

nsrjb -Iv

Note: If the autochanger does not support the -Eoption of the nsrjb command (to reinitialize the element status) use the sjiielm command to initialize the element status. For more information about the nsrjb and sjiielm commands, refer to the Legato Command Reference Guide.

How to Reset and Inventory an Autochanger with Removable

Storage Enabled

To reset and inventory an autochanger with Removable Storage enabled:

1.In the NetWorker Administrator program, select Autochanger from the Configure tab.

2. In the Autochanger window, right-click the icon for the Removable

4

Storage jukebox and select Delete.

 

3.Start a Windows command prompt and change to the directory that contains the NetWorker binary files. The default location is <NetWorker_install_path>\bin.

4.At the Windows command prompt, run the jbconfig command to create a new Removable Storage jukebox. Give the jukebox a temporary name; you will delete it later in this procedure. In the following example, user input is shown in bold.

1)Install a SmartMedia Jukebox.

2)Install an Autodetected SCSI Jukebox.

3)Install an Autodetected NDMP SCSI Jukebox.

4)Install an SJI Jukebox.

5)Install an STL Silo.

6)Install a Microsoft Removable Storage Jukebox.

What kind of Jukebox are you installing? [1] 6

Installing a Removable Storage Jukebox.

Legato NetWorker, Release 7.0

75

Disaster Recovery Guide