HP Legato Networker manual Task 8 Locate the Server’s Client File Index Save Set IDs, 148

Restoring an Entire Cluster

What is the name of the device you plan on using /dev/ntape/tape0_d1

	3. When the following message appears, enter the save set ID for the latest
	bootstrap. If you are recovering a cloned version of the bootstrap, specify
	the save set ID associated with the clone.
	Enter the latest bootstrap save set ID []: 20076
9	4. When the following message appears, enter the file number to begin the
	recovery. If unknown, press [Enter].
	Enter starting file number (if known) [0]: 130
	5. When the following message appears, enter the first record number to
	begin the recovery. If unknown, press [Enter].
	Enter starting record number (if known) [0]: 0
	6. When the following message appears, follow the prompt:
	Please insert the volume on which save set id 20076 started
	into /dev/ntape/tape0_d1.
	Once you have loaded the appropriate volume, the following message
	appears:
	Scanning /dev/ntape/tape0_d1 for save set 20076; this
	might take a while...
	NetWorker software then scans the volume for the appropriate save set
	and recovers it. The NetWorker media database and resource
	configuration files are recovered when the following message appears:
	If your resource files were lost, they are now recovered
	in the ‘res.R’ directory. Copy or move them to the ‘res’
	directory, after you have shut down the service. Then
	restart the service.
	Otherwise, just restart the service.
	If the on-line index for the server-name was lost, it
	can be recovered using the nsrck command.
	Task 8: Locate the Server’s Client File Index Save Set IDs
	Locate the save set IDs of the NetWorker server’s client file index. If there have
	been incremental backups since the last full backup, you need the save set ID
	of the last full backup and the save set IDs of each incremental backup since
	the last full backup.
148	Legato NetWorker, Release 7.0
	Disaster Recovery Guide