Chapter 4: Windows Disaster Recovery
• For Windows 2000 NetWorker clients (or Windows .NET or Windows XP Professional clients for which an ASR disk or save set is not available), reinstall the operating system if necessary. For instructions, see “Recovering a Windows Installation” on page 60.
• For Windows NT 4.0 NetWorker clients, repair the operating system if necessary. For instructions, see “Repairing a Windows NT 4.0 Operating System Installation” on page 57.
3. Ensure that the recovery requirements are satisfied. For instructions, see “Task 1: Satisfy the NetWorker Client or Storage Node Recovery Requirements” on page 83.
4. Reinstall the NetWorker software, if necessary. For instructions, see “Task 2: Reinstall the NetWorker Client or Storage Node Software” on page 83.
5. Recover the data and SYSTEM save sets using the NetWorker User program. For instructions, see “Task 3: Recover the NetWorker Client or Storage Node Data” on page 84.
6. Reboot the computer after the recovery is complete.
7. Verify the recovery. For instructions, see “Task 4: Verify the NetWorker
4
If you are performing disaster recovery on more than one computer, recover the computers in the following order:
1.The NetWorker server
2.The NetWorker storage nodes (if any) used by the NetWorker server
3.The NetWorker clients associated with the NetWorker server
Note: If the backup device to be used for the recovery is connected to a storage node, you might have to perform a partial recovery of the storage node before you begin recovery of the NetWorker server. For more information, see “Recovering a NetWorker Client or Storage Node” on page 82.
Legato NetWorker, Release 7.0 | 51 |
Disaster Recovery Guide |