Chapter 6: Microsoft Cluster Disaster Recovery (Windows NT 4.0)
This chapter describes how to recover one or more computers in a Windows NT 4.0 cluster.
This chapter includes the following sections:
•“Recovering One Node in a Cluster” on page 111
•“Recovering a Cluster Shared Disk” on page 113
•“Replacing the Quorum Disk and Recovering Its Data” on page 116
•“Recovering the MSCS Cluster Configuration” on page 117
•“Performing a
Important: To ensure proper termination, never power off any node in the cluster unless it is connected with a Y cable.
Recovering One Node in a Cluster
Note: In the example used for the following tasks, Node_A is still working and Node_B has failed.
To recover a failed node within a cluster, perform the following tasks:
•“Task 1: Evict Node_B from the Cluster” on page 112
•“Task 2: Reinstall Windows NT 4.0 and MSCS on Node_B” on page 112
•“Task 3: Reinstall the NetWorker Software” on page 113
•“Task 4: Recover the Data on Node_B” on page 113
Legato NetWorker, Release 7.0 | 111 |
Disaster Recovery Guide |