HP Legato Networker manual On the Primary Node, On Each of Remaining Node in the Cluster, Etc/rc

Performing a Cluster-Wide Recovery

Task 4: Restore the Data

The procedures to restore the data on the primary and each of the remaining nodes in the cluster differ. For more information, see the following sections:

•“On the Primary Node” on page 162

•“On Each of Remaining Node in the Cluster” on page 162

On the Primary Node

To restore data on the primary node:

	1. Use the mmrecov command to restore the indexes, media database, and
	resource files.
	2. Use the recover command to recover the following initialization
	directories:
	AIX
	•	/etc/rc*
	HP-UX
11	•	/etc/rc*
	Linux
	•	/etc/init.d
	•	/etc/rc*.d
	For detailed instructions on using the recover and mmrecov commands,
	refer to the man pages or the Legato Command Reference Guide.

On Each of Remaining Node in the Cluster

To restore data on each of the remaining node in the cluster: 1. Install NetWorker software and run the NetWorker client.

2. Recover the data and software from recent backups or from the product installation CD-ROMs.

3. Using the virtual NetWorker server, recover the following files:

• $FT_DIR/config/*

• $FT_DIR/log/*

• $FT_DIR/<domain_name>_<node_name>

162	Legato NetWorker, Release 7.0
	Disaster Recovery Guide