Chapter 6: Microsoft Cluster Disaster Recovery (Windows NT 4.0)
4.Install the latest service pack software on Node_B. Make sure the version is greater than Service Pack 3.
5.If NetWorker Server is installed in Node_A as a failover server:
a.Install NetWorker server software.
b.Register the resource extension. This manages the NetWorker server resource type in Node_B. For more details, refer to the Legato NetWorker Installation Guide, Microsoft Windows Version.
c.On Node_B, you can choose to:
–Configure the tape devices
–Install the NetWorker client software
6.Install any NetWorker specific patches.
7.Recover all the data that belongs to Node_B. This includes the system configuration data. For example:
•System State
•RepairDisk
•Windows NT 4.0 %SystemRoot% directory
•C:
8.Reboot Node_B.
9.Verify that the system has been restored to its original state before the disaster.
6
Legato NetWorker, Release 7.0 | 125 |
Disaster Recovery Guide |