HP Legato Networker Ssid, Staging, Stand-alone, Storage device, Storage node, System Reference

Glossary

Glossary

SMS	An abbreviation for system management software,
	which is a Microsoft-based software installation
	system that allows the wide-scale, automatic
	installation of software products on clients from a
	single remote server.
SNMP	An abbreviation for Simple Network Management
	Protocol, which is a protocol that defines the
	communication between a manager (sometimes called
	a monitor or management station) and an object (the
	item being managed). NetWorker software uses
	SNMP to send messages to the administrator about
	NetWorker events.
ssid	See save set ID.
staging	The process of moving data from one storage medium
	to another, less costly medium, and later removing the
	data from its original location.
stand-alone	In a cluster environment, if the NetWorker.clustersvr
	file is missing at the binary location, the NetWorker
	server will start in noncluster mode, also called
	stand-alone mode. The stand-alone mode is
	sometimes referred to as the server backing up itself.
stand-alone	A storage device that contains a single drive for backing
device	up data.
storage device	The hardware that reads and writes data during
	backup, recovery, or other NetWorker operations.
storage node	A storage device physically attached to another
	computer whose backup operations are administered
	from the controlling NetWorker server.
System Reference	The HP TruCluster utility used to manage cluster
Manual (SRM)	nodes.
console
user groups	In the NetWorker software, refers to configuration
	resources that are used to assign users to access
	control groups and to configure the privileges
	associated with those groups.
182	Legato NetWorker, Release 7.0
	Disaster Recovery Guide