NetWorker Server Recovery Requirements
The NetWorker software scans the volume for the appropriate save set and then begins the recovery. The NetWorker nsrmmdbasm command is used to recover the media database, and the uasm command is used to recover the resource configuration files. You can use the NetWorker Administrator program to monitor the recovery.
Note: The media database might not be on the same volume as the resource configuration files. If this is the case, the recovery pauses and prompts you when additional media is required.
Task 5: Rename the Resource Configuration Files
|
|
| Because the NetWorker server’s resource configuration files cannot reliably be |
|
|
| overwritten while the NetWorker services are running, the mmrecov |
|
|
| command recovers the res directory as res.R. |
|
|
| To put the recovered resource configuration files into effect: |
|
|
| 1. Stop the following NetWorker services on the NetWorker server: |
|
|
| • NetWorker Backup and Recover Server |
|
|
| |
4 |
|
| • NetWorker Remote Exec Service |
|
| 2. Copy the contents of the <NetWorker_install_path>\res.R directory to the | |
|
|
| <NetWorker_install_path>\res directory. |
|
|
| 3. Restart the NetWorker services. |
|
|
| Task 6: Reset and Inventory the Autochanger |
|
|
| If you are using a |
|
|
| task and proceed to “Task 7: Recover the NetWorker Server’s Client File |
|
|
| |
|
|
| How to Reset and Inventory an Autochanger with Removable |
|
|
| Storage Disabled |
|
|
| To reset and inventory an autochanger with Removable Storage disabled: |
|
|
| 1. Start a Windows command prompt and change to the directory that |
|
|
| contains the NetWorker binary files. The default location is |
|
|
| <NetWorker_install_path>\bin. |
|
|
| 2. To reset the autochanger, eject volumes, reinitialize the element status, |
|
|
| and check each slot for a volume, run the following command: |
|
|
| nsrjb |
|
|
|
|
74 | Legato NetWorker, Release 7.0 | ||
Disaster Recovery Guide | |||