Chapter 9: HP TruCluster Disaster Recovery
To locate the client file index save set IDs, use the mminfo command to display the client file index’s save set ID:
#mminfo
where cluster_default_alias is the name of the cluster.
Task 9: Recover the Server’s Client File Index
In this task, you recover the most recent client file index from the last full | 9 |
backup and all subsequent incremental backups. The client file index contains |
detailed information about the backups performed for each NetWorker client.
1. Use the recover command to restore the client file indexes. Recover the most recent full backup first and then recover the subsequent incremental backups from earliest to latest. For example, if the dates for the last full backup and the last two incremental backups are as follows:
• Oct. 15, last full backup
• Oct. 16, second to last incremental backup
• Oct. 17, last incremental backup
then to restore the client file indexes you would enter the following:
#recover
#recover
#recover
where the _SSID variables are the save set IDs of the last full backup, the second to last incremental backup, and the last incremental backup, respectively.
2.Use the nsrim command to
#nsrim
3.Use the nsrck command to check and repair the client file indexes if necessary:
#nsrck
4.Verify that the indexes were recovered properly:
#nsrinfo cluster_default_alias
where cluster_default_alias is the name of the cluster.
Legato NetWorker, Release 7.0 | 149 |
Disaster Recovery Guide |