HP Legato Networker manual Task 1 Evict NodeB from the Cluster

Task 1: Evict Node_B from the Cluster

Task 1: Evict Node_B from the Cluster

To evict Node_B from the cluster:

1.Ensure that the cluster resources failed over to Node_A, the working node. This includes the quorum disk and any shared disks.

2.If any of the data that failed over from Node_B to Node_A is corrupt, use the NetWorker software to recover the data.

Note: You may need to shut down some cluster resources that depend on this data.

3.From the Cluster Administrator on Node_A, evict Node_B from the cluster.

4.Shut down Node_B if it is still running and disconnect it from the cluster.

5.Fix or replace the damaged hardware on Node_B, if necessary.

6.Reconnect Node_B to the cluster.

Task 2: Reinstall Windows NT 4.0 and MSCS on Node_B

To reinstall Windows NT and MSCS on Node_B:

1.	Install the Windows NT 4.0 Server Enterprise Edition.
2.	Apply Windows NT 4.0 service pack 3.
3.	Install the MSCS software.
4.	If the node had a local tape drive, install the device driver.
5.	Install the latest Windows NT 4.0 service pack.
6.	Join Node_B to the cluster with Node_A.
7.	Assign the same drive letters that were previously assigned to the disk
6	volumes.

Important: Any local drive letters you assign should not conflict with the drive letters assigned to any of the shared disks.

112	Legato NetWorker, Release 7.0
	Disaster Recovery Guide