HP Legato Networker manual Task 2 Restore the Cluster, Scanner devicepath /tmp/savefile 2&1

Performing a Cluster-Wide Recovery

2. Install the AAM software. For detailed instructions, refer to the Legato Automated Availability Manager Installation Guide.

3. Install the NetWorker software. For detailed instructions, refer to the appropriate Legato NetWorker Installation Guide.

4. Make sure that the NetWorker client and server software are running locally.

Task 2: Restore the Cluster

1. Determine the save set ID that contains the following cluster configuration

	and system files:
	If you do not know the save set ID, use the scanner device_path command
	to determine its value, as follows:
	scanner device_path > /tmp/savefile 2>&1
	AIX
	•	/usr/bin/nw_ux.lc
11	•	$FT_DIR/config/*
	•	$FT_DIR/log/*
	•	$FT_DIR/<domain_name><node_name>
	•	$FT_DIR/bin/envsh (envcsh for C-shell)

HP-UX

•/opt/networker/bin/nw_ux.lc

•$FT_DIR/config/*

•$FT_DIR/log/*

•$FT_DIR/<domain_name><node_name>

•$FT_DIR/bin/envsh (envcsh for C-shell)

Linux

•/usr/sbin/nw_ux.lc

•$FT_DIR/config/*

•$FT_DIR/log/*

•$FT_DIR/<domain_name><node_name>

•$FT_DIR/bin/envsh (envcsh for C-shell)

Note: $FT_DIR is the installation location for the AAM software.

160	Legato NetWorker, Release 7.0
	Disaster Recovery Guide