Chapter 4: Windows Disaster Recovery
•Change to <NetWorker_install_path>\bin before executing the recover.exe command.
•At the command prompt, include the full path and filename to <NetWorker_install_path>\bin\recover.exe.
•Ensure that <NetWorker_install_path>\bin occurs before %SystemRoot%\System32 in your PATH environment variable.
To create an ERD using the NetWorker recover command:
1.On the NetWorker server, insert a blank, formatted disk into the A: drive.
2.Change to the directory that contains the NetWorker binary files. The default location is <NetWorker_install_path>\bin.
3.Recover the REPAIRDISK save set using the recover command as follows: recover
recover> cd /
recover> add REPAIRDISK |
| |
recover> relocate a:\ | 4 | |
recover> recover | ||
|
This procedure initiates recovery of the failed computer’s REPAIRDISK save set to the disk in the NetWorker server’s A: drive.
How to Use the ERD to Repair the Windows NT 4.0 Installation
To use the ERD to repair the Windows NT 4.0 installation:
1.On the computer you are recovering, insert Windows NT 4.0 Setup Disk 1 into drive A: and reboot the computer.
2.When prompted, insert Windows NT 4.0 Setup Disk 2 into drive A: and press [Enter].
3.When the Setup Welcome screen appears, press [R] to select the Repair option.
4.Select the appropriate emergency repair options, then select Continue and press [Enter].
5.When prompted, insert Windows NT 4.0 Setup Disk 3 into the A: drive and press [Enter].
6.Insert the ERD into the A: drive and press [Enter].
Legato NetWorker, Release 7.0 | 59 |
Disaster Recovery Guide |