HP Kyocera Extended Driver manual To install using a Network Connection

The installation of the printer is now complete. If prompted, restart your system.

Network Connection

This section describes how to install the printer driver when connecting to a network printer.

For further details on connections using other network protocols, consult the configuration guide supplied with your network interface card.

NOTE

The KPrint utility must be installed in order to connect to a network printer. For further details, refer to the supplied Kyocera Software Library CD-ROM.

NOTE

To install using a Network Connection:

1Ensure the computer and printer are turned off.

2Connect to the computer and printer using a network cable. Once connected, turn on both devices.

•Ensure the printer is ready to print (remove packing materials, insert paper

	and any toner or ink cartridges) before connecting the cable.
NOTE	• For further details on connecting using a parallel cable, refer to the printer's
	Operation Guide.
	• If the Welcome to the Found New Hardware Wizard dialog box displays, click
	Cancel.

3Insert the Kyocera Software Library CD-ROM into the CD drive.

Once the installation program launches, the License Agreement dialog box displays.

	If the installation program fails to launch after inserting the CD-ROM into the CD
	drive, navigate to Windows Explorer, access the CD-ROM, and double-click the
NOTE	Setup.exe file.

14