Installation of New Pump
Info: The hardware for attaching the Hydrau- lic Pump (GF #1010S005) to the mast and boom comes with the lift frame.
1. Attach the bottom of the new hydraulic pump |
to the lower mast bracket with the pressure |
knob and pump lever toward the bottom of |
the pump, as shown at near right, and the |
“FRONT” label toward you, as shown at far |
right. Use a hex bolt, washers, and hex nut to |
secure pump to mast. Use two 9/16" wrenches |
to tighten. |
mast |
attach new pump to lower mast
detail — attach new pump to lower mast
2. Attach the top of the hydraulic pump to the |
upper boom bracket, as shown at right. Use |
a hex bolt, washers, and hex nut to secure |
pump to boom. Use two 9/16" wrenches to |
tighten. |
WARNING: Ensure that the Hydraulic Pump is installed as described. If the Hydraulic Pump is not properly installed, personal injury and damage to the Hydraulic Pump could result.
boom |
upper boom |
bracket |
attach new pump |
to upper boom |
| 17 |
