8TROUBLESHOOTING
WARNING: If you experience a problem with your lift and are unable to service it your- self, contact your Lumex dealer.
SYMPTOM | POSSIBLE CAUSE | ACTION |
Patient lift does not go up | Air in the cylinder | Bleed the cylinder by turning the release |
or down |
| knob and push down on the mast. Pump |
|
| up the lift again and turn the release knob |
|
| again. |
| Loss of hydraulic fluid (leaking | Replace any leaking cylinder |
| cylinder) |
|
Patient lift does not go | Air in the cylinder | See above Directions |
down |
|
|
Info: If the hydraulic cylinder begins leaking fluid, do not operate. Contact your Lumex dealer for a new cylinder.
| 19 |
