INSTALLATION OF 1010S005 HYDRAULIC PUMP
Removal of Existing Pump
1.Follow the instructions in this section to remove the existing pump, shown at near right. If installing pump for the first time, proceed to INSTALLATION OF NEW PUMP.
2.Remove the top of the exist- ing pump from the upper boom bracket, as shown at
3.Remove the bottom of the exist- ing pump from the lower mast bracket, as shown at far right. Use two 9/16" wrenches to remove the hardware that secures bottom of pump to lower mast bracket. This will free the pump — take care that it does not fall.
existing pump |
existing pump
upper boom | boom |
bracket |
|
detach existing pump from upper boom
lower mast
mast bracket
detach existing pump from lower mast
| 16 |
