HP Kyocera Extended Driver Media tab, select Cassette, To print on both sides, follow these steps

Printing from Applications

When using a network port, select Enable Manual Duplex on Network Port in the Compatibility Settings dialog box, accessed from the Device Settings tab. Manual Duplex cannot be used on a network port in Windows 9x.

To print on both sides, follow these steps:

1In the Media tab, select Cassette 1.

2In the Layout tab, select Print on Both Sides (Manual Duplex).

3Select Flip on Long Edge or Flip on Short Edge.

4Select Print Instructions to print an instruction sheet. Follow the printed instructions for placing the pages back into the cassette after the first side is printed.

- OR -

Clear Print Instructions and follow steps 5-7.

5Click OK in the Properties dialog and Print dialog. The even-numbered pages will be printed.

6When printing stops, remove all printed sheets from the output tray.

With Flip on Long Edge selected, turn the stack over on the long edge and put the pages into the cassette.

With Flip on Short Edge selected, turn the stack over on the short edge and put the pages into the cassette.

7Click OK in the Manual Duplex Instruction dialog box.

The odd-numbered pages will be printed.

61