HP Kyocera Extended Driver manual Punch and Booklet Printing cannot be used simultaneously

4Set either Finisher (Face-down)or Finisher (Face-up)as the output destination, then enable the Offset check box in the Finishing Options section.

5 Click OK to return to the Print dialog box, and click OK to start printing.

After the first set is delivered, the second set will be delivered offset to the side. Then the printer delivers the third set in the same position as the first and the fourth set in the same position as the second.

Punch

The Punch feature inserts holes in each printed page.

The Punch feature is available on printers with supported optional finisher installed.

After installing the printer driver, optional equipment must be selected in the driver in order to use the punch option (device settings). For further details, refer to Installing Optional Devices on page 30.

Punch and Booklet Printing cannot be used simultaneously.

NOTE

Using the Punch

1In the Properties dialog box, click the Output tab.

2Select either Finisher (Face-down) or Finisher (Face-up) as Output destination.

92