The features are listed below:
•Jobs are managed internally with job IDs and printed after saving by an application (KM- NETJob Manager).
•Barcode Print Output is supported and facilitates future printing with an optional barcode reader.
•Both types of jobs are saved on the hard disk, up to the
Printing and Saving Temporary and Permanent Jobs
Check that your printer has an optional hard disk installed.
NOTE
1From the application’s Print dialog box, access the Properties. (Select Print from the File menu).
2Open the Properties dialog box, and click the Output tab.
3Click Job Settings... to access the Job Settings dialog box.
4Select the Job Storage
5When printing a job with a job ID barcode, open the Barcode Option dialog box and make the appropriate settings.
For further details, refer to Printing Additional Copies of Saved Jobs on page 122.
NOTE
Click OK to return to the Print dialog box. While printing, the job will be simultaneously saved on the hard disk as either a temporary or permanent job.
To reprint temporary or permanent jobs, the dedicated
NOTE | For further details, refer to Using |
on page 121. |
120