HP Kyocera Extended Driver manual 123, Printing a barcode on a print job

Using Optional Equipment

By simply reading the barcode with the barcode reader, you can reprint either a page or the entire job.

Printing a barcode on a print job

1From the application’s Print dialog box, access the Properties. (Select Print from the File menu).

2Open the Properties dialog box, and click the Output tab.

3Click Job Settings... to access the Job Settings dialog box.

4Select the Job Storage (e-MPS) check box. Select Temporary or Permanent.

5Click Options... to open the Job Storage Options dialog box.

6Select the Barcode check box. Select Print first page only or Print all pages.

7If you want to print the job ID as characters with the barcode, as shown in the diagram below, enable the Print Barcode ID check box.

{28L016T50}

8From the Position list, select the barcode position on the page. From the Orientation list, select the direction of the barcode.

9Click OK.

123