Printer Properties

3Select the check box of an optional device shown in blue, (such as the Finisher options), and a sub-dialog box appears with additional setting details.

NOTE

Punch Settings

•Double-click the option to open the sub-dialog box if a device listing is already enabled.

•The Hard Disk Settings dialog box appears if you select the Hard Disk option, enabling the configuration of virtual mailbox settings. For further details, see Assigning Virtual Mailboxes on page 32.

4In the Memory box, select the memory capacity of your printer. This setting is required to optimize the downloading of printer fonts.

Select the check box for the finishing device the Device Options list, such as Finisher or Multi-Finisher. The Punch Unit Setting dialog box appears. Double-click the option to display the Punch Unit Setting dialog box if the device listing is already enabled.

Select 2 Hole, 2 & 3 Hole, or 2 & 4 Hole punch option depending on the optional Punch Unit attached to your finisher to enable hole punching.

31