HP Kyocera Extended Driver Offset and Staple cannot be used simultaneously, Output direction

Using Optional Equipment

document is printed that has a total of 58 pages, the print job will be split into two separate stapled sets of 50 and 8 pages.

5Click OK to return to the Print dialog box, and click OK to start printing.

6The final printed document is stapled by the finisher and delivered to the output tray. For further details about stapler specifications, refer to your supplied finisher Operation Guide.

Offset

The Offset stacks each printed document by shifting from right to left as it is delivered to the output tray.

Output direction

Offset is available on printers with a supported finisher (optional) installed.

After installation, optional equipment must be recognized by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 30.

Offset and Staple cannot be used simultaneously.

NOTE

Using the Offset

1From the application’s Print dialog box, specify the number of copies of the document to be printed.

2Click Properties in the Print dialog box. The Properties dialog box appears.

3Click the Output tab in the Properties dialog box.

91