Section 2: Basic Installation
Using DHCP in Windows
Follow these
1.Edit or create a scope in the DHCP manager of the DHCP daemon. The entries included into this scope should include the following:
•range of IP addresses
•subnet mask
•lease duration
•default router IP address
2.Activate the scope
3.Enable the DHCP_ENB parameter in the Configuration file of the AXIS 540/640 using AXIS NetPilot or any other preferred method.
Note: ❏ DHCP is only available in “+” and Token Ring models.
34 | AXIS 540/640 User’s Manual |
