Section 2: Basic Installation
Basic Set Up of the Network
Installation Guide After connecting the AXIS 540/640 to your network you are now ready to perform the basic setup procedures. The method of installation that you choose should be dictated by your printing requirement and the type of network into which you are integrating. Proceed with an appropriate installation method from the list below:
NetWare • If you have access to a Windows platform which uses NetWare you should firstly follow the procedures defined in:
-Basic Set Up with AXIS NetPilot, on page 22.
-Section 3 Setting Up - NetWare
UNIX • Perform the basic TCP/IP set up procedures if your network uses UNIX workstations, as defined in:
-Basic Set Up for TCP/IP, on page 25.
-Section 7 Setting Up - UNIX
Windows • If your Windows platform uses NetBIOS/NetBEUI, use the NetPilot only if you want to change the default print server name. If this is unnecessary, proceed directly to:
- Section 4 Setting Up - Windows
|
| If your Windows platform uses neither NetWare nor NetBEUI, |
|
| you must initially perform the basic TCP/IP set up procedures, as |
|
| defined in: |
|
| - Basic Set Up for TCP/IP, on page 25. |
|
| - Windows NT LPD Printing, Section 4 |
OS/2 | • | If your network uses OS/2 workstations, use the NetPilot only if |
|
| you want to change the default print server name. If this is |
|
| unnecessary, proceed directly to: |
|
| - Section 5 Setting Up - OS/2 |
Macintosh | • | If the only workstations on your network are Apple computers, |
|
| you should refer directly to: |
|
| - Section 6 Setting Up - Macintosh |
20 | AXIS 540/640 User’s Manual |
