Axis Communications 540/640 manual Put config Config

Appendix B: The Parameter List

Editing using The File Transfer Protocol provides another alternative for changing FTP the parameter settings.

UNIX, Windows and Follow the step-by-step procedure below to edit the config file from OS/2 Workstations UNIX, Windows and OS/2 workstations, using FTP:

1. Log in to the AXIS 540/640 by typing the command:

ftp <host name>↵

2.Enter root as user id and pass as password.

3.Up-load the config file by typing: get config↵

4.Edit the file using your preferred text editor.

5.Down-load the config file by typing:

put config CONFIG↵

Notes: ❏ It is important that the edited filename is specified in block capitals. Otherwise, the edits are regarded as temporary and will be lost once the AXIS 560/660 has been powered down.

❏The method for performing file transfers using FTP can vary, dependent upon which FTP application you are using.

Editing from a To edit the config file from a Macintosh you will need FTP support Macintosh such as MacTCP, Fetch or Anarchie. The procedure for doing this is

the same as described for UNIX above.

Printing parameters The current parameter list may output to a printer connected to the on the printer AXIS 540/640 by double-clicking the Test button.

98 AXIS 540/640 User’s Manual