Axis Communications 540/640 manual Setting Up Unix, Installation in the Unix Environment

Section 7: Setting Up - UNIX

Section 7 Setting Up - UNIX

Installation in the UNIX Environment

Having performed the basic TCP/IP setup procedures as defined in Section 2 - Basic Installation, you are now able to print in interactive mode using FTP or Reverse Telnet protocols.

However, should you require to integrate the AXIS 540/640 into your host spooler you will now need to use the Axis automatic installation script axinstall. This utility software is resident on the AXIS 540/640 and can be can be up-loaded to your host using FTP, so no disks or tapes are required. Having completed this operation the printer connected to the AXIS 540/640 will appear as though it is directly connected to the host printer spooler.

If you intend to operate your AXIS 540/640 in a multiprotocol environment, you should also proceed to the other relevant sections in this manual, namely:

Section 3 Setting Up - NetWare

Section 4 Setting Up - Windows

Section 5 Setting Up - OS/2

Section 6 Setting Up - Macintosh

Section 8 Web Based Management

Note: ❏ The script axinstall is not available in the AXIS 540 and AXIS 542 models. However, this script may be uploaded from any other of the AXIS print servers and used for configuring these models.

This script can also be downloaded from the AXIS Utilities diskette or alternatively, obtained via the Axis WWW Home Page, see Appendix C - Updating the Software.

AXIS 540/640 User’s Manual 69