Axis Communications 540/640 manual Setting Up Macintosh

Section 6: Setting Up - Macintosh

LaserWriter 7.0 Open the Chooser window by starting the Chooser from the Apple Printer Driver menu. Follow these steps to choose a printer:

1.Click the LaserWriter icon.

2.If your network has more than one zone, click on the zone you want. If your network has no zones, this box does not appear.

3.Click the name of the printer you want.

The default AXIS 540+/542+ printer names are shown as: AXIS<nnnnnn>_<port>, where <nnnnnn> is the last six digits of the AXIS 540+/542+ serial number, and <port> is LPT1. For example: AXIS100086_LPT1

4.Click the close box.

This completes the configuration and closes the Chooser.

Repeat this procedure for each Macintosh on the network using the

AXIS 540+/542+.

LaserWriter 8.0 Open the Chooser window by starting the Chooser from the Apple Printer Driver menu. Follow these steps to choose a printer:

1.Click the LaserWriter 8.0 icon.

2.If your network has more than one zone click on the zone you want. If your network has no zones, this box does not appear.

3.Click the name of the printer you want.

The default AXIS 540+/542+ printer names are shown as: AXIS<nnnnnn>_<port>, where <nnnnnn> is the last six digits of the AXIS 540+/542+ serial number, and <port> is LPT1. For example: AXIS100086_LPT1

4.Click the ‘Setup...’ button, and then the ‘Auto Setup’ button. If the printer supports bi-directional printing and the appropriate PPD file is available, the installation will now be performed automatically and you should proceed directly to step 6. However, if this is not the case, the PPD file must then be selected manually, as described in step 5.

AXIS 540/640 User’s Manual 65