Axis Communications 540/640 manual Windows NT LPD Printing

Section 4: Setting Up - Windows

Client-Server Printing: To print in client-server mode from within a Windows NT Client Setup environment, it is necessary to setup the server on a Windows for

Workgroups workstation. Refer to Client-Server Printing: Server Setup, on page 49.

Follow these steps to use your AXIS 540/640 for client-server printing at a Windows NT client:

1.Open Print Manager.

2.In the Printer menu, select Connect to Printer...

3.In the Shared Printers list, select the printer you want to use. Click OK.

The client setup is completed and you can now print through your

AXIS 540/640.

Windows NT - LPD Printing

This section describes how to set up a Windows NT Server (ver. 3.5 or later) for LPD printing over the TCP/IP protocol.

If you have not already done so, you should perform the TCP/IP basic setup procedures prior to installing a printer for LPD printing. These procedures are defined in Basic Set Up for TCP/IP, on page 25.

54 AXIS 540/640 User’s Manual