Appendix B: The Parameter List
The Config File
The remainder of this appendix contains the complete AXIS 540/640 parameter list. The
Most parameters will take effect in the print server for the next incoming print job after being changed. However, those parameters marked (Requires Restart), will require the print server to be restarted before the new parameter setting can take effect. Restart is also required when the Ring Speed Switch is changed on the AXIS 640.
Please note that the password relates to parameters, e.g. ROOT_PWD and PROS_PWD will only be shown when logged in as root, i.e. not when printing the parameters using the Test button.
---CONFIG MENU
NODE_ADDR. | : | 00 40 8C 10 00 86 | Node Address | ||
BASE URL. | : WWW.AXIS.COM | Default Base URL Address (AXIS 540+/640+ only) | |||
ROOT_PWD. | : pass |
| Root Password | ||
USERS. | : |
|
|
| User Authority and Printer Access |
S_ROUTE. | : auto |
| Token Ring Source Routing Mode (Only AXIS 640/642) | ||
MENU |
|
|
|
| |
|
|
|
| ||
TCP_ENB. | : YES |
| TCP/IP Protocol Enabled | ||
INT_ADDR. | : | 192 36 253 80 | Internet Address | ||
DEF_ROUT. | : | 0 | 0 0 | 0 | Default Router Address (0.0.0.0 for no router) |
NET_MASK. | : | 0 | 0 0 | 0 | Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for |
PROS_PRT. | : | 35 |
|
| PROS TCP Port Number |
PROS_PWD. | : | netprinter | PROS Protocol Password | ||
LPD_BANN. | : | NO |
|
| LPD Banner Page Disabled |
DHCP_ENB. | : | NO |
|
| DHCP Protocol Enabled |
BOOTP_ENB. | : | YES |
| BOOTP Protocol Enabled | |
RARP_ENB. | : | YES |
| RARP Protocol Enabled | |
RTN_OPT. | : | YES |
| Reverse Telnet Options Enabled | |
RTEL_PR1. | : | 0 |
|
| PR1 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR2. | : | 0 |
|
| PR2 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR3. | : | 0 |
|
| PR3 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR4. | : | 0 |
|
| PR4 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR5. | : | 0 |
|
| PR5 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR6. | : | 0 |
|
| PR6 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR7. | : | 0 |
|
| PR7 Reverse Telnet TCP Port Number (0 for Disabled) |
RTEL_PR8. | : | 0 |
|
| PR8 Reverse Telnet TCP Port Number (0 for Disabled) |
AXIS 540/640 User’s Manual | 99 |
