Section 5: Setting Up - OS/2
Section 5 Setting Up - OS/2
Having connected the AXIS 540/640 to your network, this section now describes how to set up your AXIS 540/640 for printing in the OS/2 environment.
If you intend to operate your AXIS 540/640 in a multiprotocol environment, you should also proceed to the other relevant sections in this manual, namely:
Section 3 Setting Up - NetWare
Section 4 Setting Up - Windows
Section 6 Setting Up - Macintosh
Section 7 Setting Up - UNIX
Installation Using AXIS Print Utility for OS/2
The installation and setup operations are performed with the AXIS Print Utility for OS/2. You should install this utility now if you have not already done so - see the instructions on the OS/2 Utilities disk label.
Should you require to change the default name of your AXIS 540/640 or amend any of default parameters use the AXIS NetPilot from any Windows platform that is connected to your network, or WinOS/2 window under OS/2.
The AXIS Print Utility for OS/2 is not needed on the client platforms when using a
AXIS 540/640 User’s Manual | 57 |
