Edimax Technology LAN USB Adapter Here are descriptions of every setup items, WMM Enable

Here are descriptions of every setup items:

WMM Enable	Check this box to enable WMM function. Please click ‘Apply’ button on the right of
	this check box after you check or uncheck this box, so corresponding settings in
	this window will be activated or deactivated respectively.
WMM - Power	Enable WMM power saving mode to save energy
Save Enable	and lets your battery live longer.
Setting...	Click this button to select the WMM data type which will suppress the function of
	power saving. When this kind of data is transferring, power saving function will be
	disabled. Available data types are AC_BK (Background / Low Priority), AC_BE
	(Best Effort), AC_VI (Video First), and AC_VO (Voice First).
Direct Link	Enable or disable direct link setup (DLS) function.
Setup Enable	This function will greatly improve the data transfer rate between WMM-enabled
	wireless devices. Please click ‘Apply’ button on the right of this check box after you
	check or uncheck this box, so corresponding settings in this window will be
	activated or deactivated respectively.
MAC Address	Input the MAC address of another WMM-enabled
	wireless device you wish to establish a direct link here, then click ‘Apply’ to add this
	MAC address to DLS address table.
Timeout Value	Input the timeout value of this WMM-enabled direct
	link wireless device. If the wireless
	device is not responding after this time, it will be removed from DLS table.
Tear Down	If you want to remove a specific wireless device from DLS table, select the device
	and click this button to remove it.

After you finish the settings, click ‘OK’ to close configuration utility.

- 41 -