5.Click ‘PBC’ button now to start to establish wireless connection by WPS, and please be patient (This may require several seconds to one minute to complete). When you see ‘WPS status is connected successfully’ message, means the connection between your wireless network card and access point is successfully connected by WPS, and the information about access point you connected to will be displayed.
TIPS: You can push ‘WPS’ button on network card too, it’s the same as the ‘PBC’ button in configuration utility.
Sometime WPS may fail, and you can click ‘PBC’ button few more times to try again. When an access point is connected, you can click ‘Disconnect’ to disconnect your wireless network card from a connected access point, or select another
If you want to delete a found access point from the list, select it and click ‘Delete’ button.
- 45 -
