![Manual background](/images/new-backgrounds/134070/13407055x1.webp)
Here are descriptions of every setup items:
Authentication | Select the authentication type of the wireless access |
Type | point or wireless device you wish to connect. If you’re adding a profile from an |
| existing access point or wireless device, the value will be selected automatically, |
| and please do not modify it. |
| If you select ‘LEAP’, the following message will be displayed. Please input LEAP |
| identity, password, domain name, and select encryption type. You can check ‘Show |
| Password’ box so the password you inputted will be displayed as you type, but not |
| replace by asterisk. |
Encryption: | Select the encryption type of the wireless access point or wireless device you wish |
| to connect. If you’re adding a profile from an existing access point or wireless |
| device, the value will be selected automatically, and please do not modify it. |
WPA | Input WPA preshared key here. If encryption is not |
Preshared Key | enabled, or you select ‘WEP’ as encryption type, this field will be disabled and |
| - 27 - |