Manuals / Edimax Technology / Computer Equipment / Network Card

Edimax Technology LAN USB Adapter user manual Chapter Iii Appendix, Hardware Specification

Models: LAN USB Adapter

1 58

Download 58 pages 49.05 Kb

Page 51

CHAPTER III: APPENDIX

3-1 Hardware Specification

Standards: IEEE 802.11b/g/Draft-N

Interface: USB 2.0 (USB 1.1 Compatible)

Frequency Band: 2.4000 ~ 2.4835GHz (Industrial Scientific Medical Band)

Data Rate:	11b: 1/2/5.5/11Mbps
	11g: 6/9/12/24/36/48/54Mbps
	11n (20MHz): MCS0-15, 32 with Half Guard Interval Support (up to 144Mbps)
	11n (40MHz): MCS0-15, 32 with Half Guard Interval Support (up to 300Mbps)
Securities:	WEP 64/128, WPA, WPA2

Cisco CCX V1.0, V2.0 & V3.0 Compliance

Antenna: Internal 2 Antennas with Two TX and Two RX

Drivers: Windows 2000/XP/2003/Vista Server

LEDs: Link/Activity

Transmit Power: 16dBm ± 2dBm

Temperature: 32~131°F (0 ~ 55°C)

Humidity: 10-95% (NonCondensing)

Certification: FCC, CE

- 50 -

Image 51

Edimax Technology LAN USB Adapter user manual Chapter Iii Appendix, Hardware Specification

Contents

Version 1.0 April 802.11b/g/n Draft Wireless LAN USB AdapterUser Manual COPYRIGHT CATALOG 1-1 Introduction and safety information Chapter I Product InformationOther features of this router including 1-2 Safety Information 1-3 System Requirements 1-4 Package ContentsDescription 1-5 Familiar with your new wireless network cardLED Name Light Status2-1 Network Card Installation CHAPTER II DRIVER INSTALLATION AND CONFIGURATION3. The following message will appear on your computer, click ‘Cancel’ Optimize for performance mode Optimize for WiFi modeagain, please ignore it and wait 6. Please click ‘install’ to run the driver installation processcomplete the driver installation process HERE 2-2-1 Using Edimax Utility 2-2 Connect to Wireless Access PointHere are descriptions of every setup item Authentication Authentication type is selected automatically, please don’t change it Page Page 2-2-2 Using Windows Zero Configuration Page Page 2-3 Connection Profile Management 2-3-1 Make a profile for an access point or wireless devicePage And you can set the parameter for this connection here notebook computer to help the battery live longer Here are descriptions of every setup itemsTX Power Here are descriptions of every setup items Page Page 2-3-2 Using 802.1x - Certification After you click ‘802.1x Setting’, a new window will appearHere are descriptions of every setup items After you finish all settings, click ‘OK’ to save settings and exit Here are descriptions of every setup items 2-3-3 Using 802.1x - CA ServerDomain name After you finish all settings, click ‘OK’ to save settings and exitexactly match, connection will be dropped2-4-1 Network Statistics 2-4 View Network Statistics and Link Status2-4-2 Link Status For their explanations, please see chapter 3-3 ‘Glossary’ 2-5 Advanced Settings Wireless mode Here are descriptions of every setup itemsPage 2-6 QoS Setting WMM Enable Here are descriptions of every setup itemsNote This function supports Windows XP/XP64 Operation System only 2-7 WPS Configuration2-7-1 WPS Setup - PBC Push-Button Configuration Page Page 2-7-2 WPS Setup - PIN Page 2-8 About Please click ‘OK’ to close configuration utility CHAPTER III APPENDIX 3-1 Hardware Specification3-2 Troubleshooting SolutionScenario Enable ‘Wireless Protection’ in ‘Advanced’ tab add the MAC address of your network card to his / her accessMove closer to the place where access point is located problem when transferring large3. What does IEEE 802.11 feature support? 3-3 Glossary1. What is the IEEE 802.11g standard? 2. What is the IEEE 802.11b standard?10. Can Wireless products support printer sharing? 7. What is WEP?8. What is TKIP? 9. What is AES?17. What is STBC? 14. What is WMM?15. What is WMM Power Save? 16. What is GI?Federal Communication Commission Interference Statement 3-4 FCC and Other Compliance StatementsFCC Caution EU Countries Intended for Use SafetyFederal Communication Commission FCC Radiation Exposure Statement R&TTE Compliance Statement