Chapter 6: Microsoft Cluster Disaster Recovery (Windows NT 4.0)

3.Copy the existing quorum data from its original location to another directory. For example, copy:

G:\MSCS to G:\TEMP\MSCS

4.Replace the existing quorum data with the recovered quorum data. For example, copy:

G:\RECOVER\MSCS to

G:\MSCS

5.Shut down Node_B.

Task 3: Evict Node_B from the Cluster

To evict Node_B from the cluster:

1.Reboot Node_A.

2.Open the Cluster Administrator and evict Node_B from the cluster.

Task 4: Install the Cluster Software and Patches on Node_B

To install the cluster software and patches on Node_B:

1.Reboot Node_B.

2.Install the cluster software and join it to the cluster in which Node_A is a member node.

3.On Node_B, apply any needed cluster patches and Windows service packs.

4. Verify that the cluster configuration has been successfully recovered.

6

Performing a Cluster-Wide Recovery

Use the following procedures to perform a complete cluster recovery, including reinstallation of the operating system on all nodes. These procedures describe how to perform a recovery, either using existing hardware or new hardware.

Legato NetWorker, Release 7.0

119

Disaster Recovery Guide