Niles Audio IW650FX Setting The Bipole/Dipole Mode, Acoustic Fine Tuning, Installing The Grille

SETTING THE BIPOLE/DIPOLE MODE

Each StageFront FX loudspeaker features a BIPOLE/DIPOLE switch located on the front, as shown in Figure 8. Set the BIPOLE/DIPOLE switch on each StageFront FX loudspeaker according to the loudspeaker’s side or rear placement, as shown in Figure 8. Here are some tips on usage:

■Use the DIPOLE setting on rear loudspeakers when listening to movies and classical music. The sound will be less focused as it is reflected along the room’s boundaries. This is the best choice, since most films are mixed using non-localized surround effects, and classical music is usually recorded in a favorable acoustic environment.

■Use the BIPOLE setting on rear loudspeakers when listening to discrete multi- channel recordings that equally emphasize front and surround sounds.

■For multiple sets of StageFront FX loudspeakers, use the DIPOLE setting on the side loudspeakers (aimed at the listening position) for a more DIFFUSE surround effect. For the rear loudspeakers, use the BIPOLE setting to focus the sound.

■With the 1/8” (3.5 mm) trigger input for Bipole/Dipole mode switching, an IR macro can be used to control the loudspeaker mode. You can program this as part of your source selection. This is an easy way to have Dipole envelopment for Movie sources and Bipole performance for Music sources. (refer to page 5 for details)

ACOUSTIC FINE TUNING

Each StageFront In-Wall FX loudspeaker features a Diffuse Sound Level control located on the front for acoustic fine-tuning after installation, as shown in Figure 8. Adjust this control as follows:

■The Diffuse Sound Level control adjusts the level between the side-firing (diffuse) and front-firing drivers. Increase the level with this control for more ambiance. A decrease with this control will yield a more direct sound.

��

�

��

��

�

�

����

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

	��
�
��
�

��

�

�

�� � �

Figure 8. The In-Wall FX models feature BIPOLE/DIPOLE and Diffusion Level controls.

INSTALLING THE GRILLE

Starting at one corner, carefully align the magnetic grille into the frame and slowly allow the magnets to attach. Work around the grille edge, ensuring that the grille stays within the frame. When properly installed, the edges of the grille will be flush in appearance with the frame.

11