INSTALLATION CONSIDERATIONS
Figure 2 |
| Figure 3 |
Wiring directly from a receiver or amplifier |
| Incorporating a volume control |
|
|
|
Incorporating a Volume Control
It’s possible to control the volume of the sound at the speaker location. Plan to wire the system so that each pair of speakers has it’s own volume control. Niles makes a wide range of indoor and outdoor volume controls. Consult your local Niles dealer for more information. Volume controls are connected in line with the speaker, so you must connect the wire from the amplifier to the volume con- trol and then from the volume control to the speaker (See Figure 3).
Recommended Amplifier Power
We recommend an amplifier with a power rating of five to one hundred watts per channel for optimum performance. Ironically, most speakers are not dam- aged by large amplifiers but by small amplifiers. If you are playing at high vol- ume, a small amplifier will run out of power very quickly. When an amplifier runs out of power it creates damaging “clipping” distortion. A large amplifier will play at the same volume without distorting. See the section "Operation" for more information about clipping distortion.
8
