Niles Audio OS5.5, OS6.5 manual Connecting The Loudspeaker, Bottom of Speaker

ATTACHING THE FOOT (IF USING THE LOUDSPEAKER IN FREE-STANDING MODE)

1.Loosen the bracket knobs and remove the bracket from the loudspeaker.

2.Tighten the top knob so it does not vibrate.

3.Remove the bottom knob by unscrewing it from the cabinet.

4.Place the supplied shelf stand on the loudspeaker with the two shorter feet towards the front of the loudspeaker (see Figure 11). Make sure the ridges on the shelf stand engage the ridges on the cabinet.

5.Tighten the bottom knob so that the shelf stand does not move.

Figure 11. Mounting the shelf stand on the OS loudspeaker

Bottom of Speaker

CONNECTING THE LOUDSPEAKER

1.Separate the two conductors of the loudspeaker wire so that at least 2 inches of each conductor are free.

2.Strip away 1/2 inch of insulation from the end of each conductor of the loudspeaker wire.

3.If you have any connectors (gold pins or bananas) which you prefer to use, affix them to the stripped wire ends now. Only gold-plated connectors should be used outside, as they will not tarnish or corrode.

	(CONTINUED ON NEXT PAGE)
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373		15