Niles Audio RCA-TT2 manual Running the Sensor Cable, Wall-mount placement

Figure 11: Connecting Power Supply and Flashers

INSTALLATION (continued)

MSU140 Base

Self-Adhesive

Rubber Feet

Figure 10A: Wall-mount placement	Figure 10B: Tabletop placement
Use sheetrock screws	Affix the enclosed self-adhesive
	rubber feet to the base of the MSU140

Step 7 – Running the Sensor Cable

Conceal the sensor cable between the tabletop sensor and the connection hub. For specific information refer to “Running Sensor Cable in New

Construction” or “Concealing Sensor Cable in Existing Walls.” If you need to cut and restrip the wire, make sure that only 1/4” of wire is exposed. Exposing too much wire could create “shorts” within the system.

Important: If you have doubts about whether you are capable of installing a Niles RCA-TT2 Remote Control Anywhere! Kit in your walls, consult a Niles dealer or professional installer. They have special tools, techniques, and experience to make the impossible possible. The installer can provide you with an estimate before any work is done.

14