2.Take the nylon security cable, supplied with the loudspeaker and fold it in half. Using the middle of the cable, feed it through the Security Attachment Eyelet as shown in Figure 8.
Figure 11 Security Cable
Connected and Tightened
3.Feed the opposite end of the nylon security cable through the exposed portion of the cable that was just fed through the security eyelet, as shown in Figure 9 and 10.
Figure 12 Security Stake
Attachment to Cable
4.Pull the ends of the security cable with the loops as tight as you can until the knot around the security eyelet is tightened as shown in Figure 11.
Figure 13 Security Stake
Driven into Ground
INSTALLATION
14
