![Setting the Turn-On Mode Switch](/images/new-backgrounds/13361/1336143x1.webp)
INSTALLATION
Setting the Turn-On Mode Switch
The
Slide the switch with either your fingernail or a 1/8” slotted screwdriver blade.
The Control Output
This terminal provides a 12V DC signal suitable for triggering Niles automated switchers, some motorized screens, some electric curtain controls, etc. This voltage is present only when the ampli- fier is active or on. When the amplifier turns off, the 12V signal is off.
Using the 3.5 mm jack.
STEP | DESCRIPTION |
1. Check the requirements of the | The control output has a maximum |
device you want to control. | current capability of 150 mA. |
|
|
2. Connect the 3.5mm Jack to the | Niles makes an accessory cable |
control output maintaining proper | plug FG00724. |
polarity (tip = +) |
|
|
|
21