Installation Considerations

N ILES

N iles Audio Corporation,Inc. M iam i,Florida USA

 

AM PLIFIER

 

 

SPEAKER 6

 

 

SPEAKER 5

 

 

SPEAKER 4

 

 

SPEAKER 3

 

 

SPEAKER 2

 

 

SPEAKER 1

 

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

ON O FF

CON STANT

PRO TECTION

Cable and Wire

It will be easier to reconfigure or troubleshoot your system in the future if you label the cables and wires for their destination or source, rather than which terminal of the Niles System Integration Amplifier® they are connected to.

The Niles System Integration Amplifier® connects to your sources via shielded line level audio cables with RCA phono plugs. Use high quality cables with your Niles amplifier for the lowest possible noise and best overall performance. Your Niles dealer can recommend the proper cable.

The Niles System Integration Amplifier® connects to your speakers using 2 conductor speaker wire. For most applications, we recommend you use 16 or 18 gauge wire. For wiring runs longer than 80 feet, we recommend 14 gauge wire. The binding posts of the Niles System Integration Amplifier® will accommodate up to 12 gauge wire. Larger sizes can be accommodated by attaching banana plugs to the wire. Note that the binding posts accept dual banana or single banana connectors.

TECH TIP

Wire size is expressed by its AWG (American Wire Gauge) number. The lower the number, the larger the wire, i.e. twelve AWG is physically larger than fourteen AWG.

10

 

WWW.NILESAUDIO.COM

 

Page 10
Image 10
Niles Audio SI-250, SI-2100, SI-2150 manual Tech TIP, Cable and Wire