Niles Audio SI-245 AC Power Plug, Installation, Step, Description, on the rear of the amplifier

AC Power Plug

STEP	DESCRIPTION
Plug the female IEC socket of the sup-	Just like a computer or printer, the SI-245
plied AC cord into the IEC receptacle	has an AC cord which unplugs either at the
on the rear of the amplifier.	amp or at the wall for your convenience.
Plug the 2 prong plug into a correctly	If you use a grounded power strip, surge
grounded 120V 60 Hz wall outlet.	suppressor or extension cord, verify that
	proper ground is maintained.
CAUTION! Typically the	The SI-245 draws a maximum of approxi-
preamp/receiver’s switched outlet is	mately 200 watts from an AC wall outlet.
not rated for a power amplifier.	Use the auto turn on circuit instead.

INSTALLATION

14