Front and Rear Panel Details
Red “Power” LED confirms the amplifier is | Green “Active” LED lights when the |
connected to a live AC power outlet and | amplifier circuitry has been turned on by |
that the master power switch is on. | the |
Front panel “Master Power” switch turns off the entire amplifier, including the
Main Inputs enable you to route a stereo line level source to the
3.5 mm
The red “Protect” LED indicates the amp has shut down because there is a fault in the speaker, the wiring, or with the
Cascade Outputs of the main input enable you to daisy chain multiple amplifiers.
3.5mm
9