![Installation](/images/new-backgrounds/13265/1326523x1.webp)
Installation
Installation
Page 11 | Setting the | Page 13 | Line Level Audio Inputs |
| Switch | Page 13 | Cascade Audio Outputs |
|
| ||
Page 11 | Control Output | Page 14 AC Power plug | |
|
| ||
Page 12 | Speaker Wire Connections |
|
|
Setting the Turn-On Mode Switch
The
Slide the switch with your fingernail or a 1/8” slotted screwdriver blade.
Control Output
This terminal provides a 12V DC signal suitable for triggering Niles automated switchers, some motorized screens, some electric curtain controls, etc. The trigger volt- age is present only when the amplifier is active or “on”. When the amplifier turns “off”,
the 12 Volt signal is off. | Using the 3.5 mm jack. |
|
|
STEP | DESCRIPTION |
1. Check the requirements of the | The control output has a maximum |
device you want to control. | current capability of 12V DC 150 mA. |
2. Connect the 3.5 mm Jack to the | Niles makes an accessory cable |
control output maintaining proper | plug FG00933. |
polarity (tip = +) |
|
|
|
11