Nilfisk-Advance America 5 manual After using the cleaner, Buildings and Equipment

				POSEIDON 5
5.2.3 Buildings and Equipment				english
Task	Accessories		Method
General surfaces	Foam injectors	1.	Apply thick foam over the surfaces to be cleaned.
	Standard lance		Apply on dry surfaces. Apply from top to bottom
Metallic equipment	Curved lances		on vertical surfaces. Let the foam act for up to 30
	Tank cleaning		minutes for the optimal effect.
	head	2.	Proceed with cleaning using the high pressure
	Detergents		lance. Use applicable accessories. Use high
			pressure to dislodge large amounts of incrusted dirt
	Intensive		or grime. Use lower pressure and high water volume
	J25 Multi		in order to rapidly flush away loose dirt and rinse
	Combi Aktive		surfaces.
	Alkafoam	3.	Apply DES 3000 disinfectant once the surfaces are
	Disinfectant		perfectly clean.
	DES 3000	Areas covered by amounts of loose dirt, such as
		animal remains in slaughterhouses, can be removed
		by using high water flow to flush away the dirt to
		evacuation pits or drains.
		Tank cleaning heads can be used to clean barrels,
		vats, mixing tanks etc. Cleaning heads may be
		hydraulically or electrically powered and give the
		possibility for automatic cleaning without a constant
		user.
Rusted or	Wet Sandblasting	1.	Connect the sandblasting lance to the pressure
damages surfaces	equipment		washer and place the suction tube in the sand.
prior to treatment		2.	Always wear protective equipment during
			sandblasting.
		3. Spray the surfaces to be treated with the mix of
			water and sand. Rust, paint etc will be stripped off.

These are merely several examples of cleaning tasks that can be solved by a pressure washer in asso- ciation with accessories and detergents. Each cleaning task is different. Please consult your local dealer or Gerni representative in order to discuss the best solution for your own cleaning tasks.

6 After using the cleaner

6.1Switching off the cleaner

6.2Disconnecting supply lines

O

1.Turn the main switch to posi- tion „OFF“.

2.Close water tap.

3.Squeeze the spray gun han- dle until the cleaner is de- pressurised.

4.Lock the safety catch on the spray gun.

1.Remove the water hose from the cleaner.

2.Pull out the plug from the electrical socket.

1) Options / model variants 11