3Before you start using your pressure washer
3.1Mounting of trolley handle (models with trol- ley handle)
1.Place the trolley handle on the machine.
2.Secure the handle by mount- ing the 2 screws. Use the enclosed hexagon key.
3.2Mounting of quick coupling
3.3Mounting of high pres- sure hose on spray gun
1.Screw the quick coupling tight on to the water inlet (2).
Note: The inlet
filter (2a) must al- ways be fi tted in the water inlet pipe to fi lter out
sand, limestone and
other impurities as these will damage the pump valves.
Caution: Failure to fi t the fi lter will invalidate the guarantee.
1.Attach the high pressure hose (4) to the spray gun (7). Detach the high pressure hose by pressing the pawl
(A).
6
