5 After using your pressure washer
5.1 Storing the washer
5.2Winding up of electric cable and high pressure hose
The machine should be sto- red in a frost-free room!
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1.Stop the machine (press the start/stop switch “O” (1) and detach water hose and ac- cessory.
2.Restart the machine and activate the trigger. Let the machine run until no more water runs through the spray gun.
3.Stop the machine, unplug and wind up hose and cable.
4.Place spray handle, nozzles and other accessories in the holders of the machine.
Should the machine by mistake be frozen, it will be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the guarantee!
To avoid accidents, the electric cable and the high pressure hose should always be winded carefully up around the handle.
C 110.3 / C 110.3 X-TRA: Wind up the cable on the appropriate hook.
5.3 Storage of accessories
The spray handle, lance and nozzles can be stored on the pressure washer.
9
